If you’ve used your Pro for a few shaves, it might be time for a deep clean. Luckily, we design the base plate on your Pro to be removable, allowing you clean out any shaving cream or stray hairs stuck back there.

Here’s a quick guide to clean it up in four easy steps.


1. Remove the Cover

Find the key on your QuickLoad™ Cartridge, which is the part of the blade pack that is inserted into the head of the razor when loading a new blade.

Place the tip of the key underneath the bottom of the cover, and use it as a lever to pop the cover off. You won’t need to use too much force. It should come right off.

2. Rinse and Brush

Once you’ve removed the cover, rinse out the inside of the razor with a small amount of water. Then, grab a toothbrush you never plan on using in your mouth and start scrubbing.

You shouldn’t need to scrub vigorously if you clean out your razor on a consistent basis. There may be some shaving cream residue and some hair from previous shaves. When you’re finished scrubbing, give the razor a rinse again.

3. Dry it Off

Use a towel to dry off any excess water. If you want to get really detailed, you can use a Q-Tip to soak up any extra drops of water after you use the towel.

This is necessary so you don’t leave any water residue in your razor.


4. Put the Cover Back On

Last, the cover should just snap back into place. This is the easiest step, but if we don’t keep it on the list, someone will leave the cover off. That “someone” is obviously not you. But just to be safe, put the cover back on.

Let us know if you need more help cleaning or using your Pro.

Email us at [email protected].